*FCB 3W LED Driver for Luxeon White Green Blue *USA *fcbusa *Sure Electronics

Description

FCB Electronics
Ann Arbor, Michigan, U.S.A.
At FCB Electronics, we will only
sell & ship HIGHEST QUALITY LEDs.
This purchase is of
3 W LED Driver for Luxeon White
Green
Blue
For 3W single color LEDs, use this 3W LED driver.
Use 3 pcs 1W LED Driver for 3W RGB LED
All driver boards were tested for over 12 hours before shipping.
Maximum output current: 700mA
PWM dimming function
Maximum Load: 1-4pcs Luxeon LEDs, no less than 3 Watt each.
For example:
Amount
1 White LED
2 White LED In Serial
3 White LED In Serial
4 White LED In Serial
Minimum Input voltage
6v
8v
12v
15V
Preset Current: 700mA, it may vary from 650-710mA.
Current Ripple: 14mA RMS, 76mA p-p.
Maximum Input Voltage: 15V DC.
Suggested Input Voltage: 6-15V DC.
Efficiency: 78% @ 15V input, 3*3W Luxeon LEDs in serial connection.
How to Connect Load
Suggested connection is shown in Figure 2.
Notice:
Negative (LED -) output should be connected to GND or the housing of your instrument.
Products Number
LE-LL209
Products Name
3 W LED Driver for Luxeon White Green Blue
PCB Dimension
24 x 24 mm
Manufacturer
Sure Electronics
Item Net Weight
35g / 1.2oz
Figure2 (View from inductor installation side)