WattStopper HBP-112-L7, High/Low Bay PIR Sensor

Description

HBP-112-L7
High/Low-Bay PIR Sensor 120/230 (Single Phase L-N)/277/347 VAC, White, w/Lens
When we get this back-ordered part back in stock we will drop the price back down to .00. This will occur in the next several days! Thank you!
Occupancy Sensor, High Bay, 120/277 VAC, Coverage: 360° from 15'-40', Lens covers 100' diameter area at a height of 40’; Color: White, Includes: Lens & Back Box.
DESCRIPTION AND OPERATION
The HBP series occupancy sensors are designed for automatic lighting control in warehouse high bay applications. All models contain a passive infrared sensor (PIR). The coverage area is determined by the selected lens module. The lenses are interchangeable with any HBP series sensor.
HBP-112
The HBP-112 can be commissioned manually by adjusting the trimpots designated for Time Delay and Light Level settings.
LENS COVERAGE
The HBP-111/112 occupancy sensors are modular, consisting of two parts, a Sensor Module and a Lens. When used with the HBP-L7 lens, the sensors are optimal for mounting heights of 20’ to 40’. There is an optional masking accessory for aisle way applications. Snap it on and rotate to the desired position.
Lens and sensors are indoor rated and are ideal for warehouse spaces. Avoid placing the sensor where shelving or other obstructions may block the sensor’s line of sight.
Passive Infrared Sensing in Warehouses
Warehouses can have ambient temperature variations that may affect sensor detection and coverage areas. High temperatures at the covered area (above 80°F) reduce the detection zone of the sensor. Consider adding more sensors if the ambient temperatures are expected to be high. Additionally, high floor level temperature may require larger movement for detection. In some cases, sensors mounted above 40’ may only detect large heat signatures such as forklift trucks.
HBP‑L7: 360° Coverage
The HBP‑L7 has a lens that covers a 100’ diameter area at a height of 40’.
MOUNTING OPTIONS
The HBP series sensors can be attached to a fixture or junction box using the attached nipple. The optional extender module (HBP-EM1) can be used to lower the sensor by up to 4 inches. The extender module provides several mounting height options through the use of simple knock outs. Refer to the HBP-EM1 installation instructions for further details.