SARK-100 Mini60 HF ANT SWR Bluetooth Antenna Analyzer Meter 1-60 Mhz New

Description

Home
Payment
Shipping
About us
Contact us
Store Categories
Store Categories
Other
Details
Type 1
This is a SWR Analyzer for ham hobbists.
Frequency Generation & Control: 1 - 60 Mhz
Source impedance: 50 Ohms
Stability: +/- 100 ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
Usable Measurement Range:SWR: 1.0 to 9.99
Impedance: approx. 5 to 2000 ohms
RF Output: Adjustable: 2.0 Volts pp (typ)
Power supply: Powerd by External: 12 to 15 Volts DC, 500mA
Controls: Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
Switch: "Power On"
Connectors: RF Out: BNC
USB: Mini-B receptacle
External power: 2.1mm Power Jack (center pin positive)
Applications:
Measure antenna electrical parameters: SWR, impedance (resistance +
reactance), capacitance, inductance
Measure feedpoint impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, velocity factor, approximate Q
and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate
Q, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length of ? and ? wave phasing lines
Coaxial Cable Loss
Determine antenna tuner loss
Measure balun loss
Measure inductor Q
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
Operation button definitions:
Mode: selects operation mode: impedance(default), complex impedance, capacitance, and inducatance
BAND: select band from any of the available bands: 160M to 6M
CONFIG: Provides menu for configurations and extended functions: PC Link, step size setting, suspend timeout setting, calibration, and software upgrade
SCAN: pressing this control initiates a scan of frequencies of the selected BAND. Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna
CAN(up): increase frequency and used to cancel operation for CONFIG menu
VAL(down): decrease frequency and used to validate operation for CONFIG menu
Package includes:
1 x ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists
Type 2(With Bluetooth)
Features：
Mini size: 9.1*5.3*2.5cm
Weight:220kg
Support for Android 2.2 -4.0 or new version, supports 3--10 inch  mobile phone and tablet,
Support windows via software
Bluetooth connection method  :
1, the installation software Andrews
2 , press the SET button to open the talent PC link
3 Press the DOWN button to confirm dc plug in the Bluetooth antenna head
4 Open the Bluetooth phone paired with the day assigned for 1234
5 Open Android software click the link prompts the connection point of the scan is completed successfully
Automated antenna SWR analyzer
Hardware:
Precise and self-calibrating reflectometer design measures forward and reflected signals and impedance data
Display 2x16 with optional backlight
Precision DDS signal generator (AD9851) used as signal source
Buzzer
Operation:
Manual control option displays SWR and complex impedance at selected frequencies
Automatic scanning results displayed as frequencies of lowest SWR and complex impedance
Battery operated for field use or use external 13.8V wall adaptor
Power saving modes
Multi-point calibration for better accuracy
Instrument Capabilities:
Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance
Measure feedpoint impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length of ¼ and ½ wave phasing lines
Coaxial Cable Loss
Determine antenna tuner loss
Measure balun loss
Measure inductor Q
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
Soecifications:
Frequency Generation & Control:
1 - 60 Mhz
Source impedance: 50 Ohms
Stability: +/- 100 ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
Usable Measurement Range:
SWR: 1.0 to 9.99
Impedance: approx. 5 to 2000 ohms
Adjustable: 2.0 Volts pp (typ)
External: 12 to 14 Volts DC, 500mA
RF Output:
Power supply: DC 12-14V
Controls:
Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
Switch: "Power On"
USB: Mini-B receptacle
External power: 2.1mm Power Jack (center pin positive)
Package included:
1*SARK-100 Mini60 HF ANT SWR Antenna Analyzer Meter 1-60 Mhz SARK100 Für Ham Radio(
Please note: Battery is not included
)
Type 3(No bluetooth)
Hardware:
Precise and self-calibrating reflectometer design measures forward and reflected signals and impedance data
Display 2x16 with optional backlight
Precision DDS signal generator (AD9851) used as signal source
USB port connects to PC for field-upgradeable software and uploading of real-time measurement data
Buzzer
Operation:
Manual control option displays SWR and complex impedance at selected frequencies
Automatic scanning results displayed as frequencies of lowest SWR and complex impedance
Power saving modes
Multi-point calibration for better accuracy
Instrument Capabilities:
Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance
Measure feedpoint impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length of ¼ and ½ wave phasing lines
Coaxial Cable Loss
Determine antenna tuner loss
Measure balun loss
Measure inductor Q
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
SPECIFICATIONS
Frequency Generation & Control:
1 - 60 Mhz
Source impedance: 50 Ohms
Stability: +/- 100 ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
Usable Measurement Range:
SWR: 1.0 to 9.99
Impedance: approx. 5 to 2000 ohms
RF Output:
Adjustable: 2.0 Volts pp (typ)
Power supply:
External: 12 to 14 Volts DC, 500mA
Controls:
Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
Switch: "Power On"
Connectors:
RF Out: BNC
USB: Mini-B receptacle
External power: 2.1mm Power Jack (center pin positive)
Package includes:
1 x Antenna Analyzer (as the picture)(
Please note: Battery is not included
)
Type 4(This is an Short Wave Antenna Analyzer Meter Tester)
Can test a standing wave, resistance, capacitance, etc
Can connect the computer to do the antenna and other graphic analysis
Test frequency: 1-60 m
Size: 90 mm * 82 mm * 30 mm (super light super mini)
Power supply: 12 v
Joint: Q9 head
Package Contents
1xMR100 Shortwave Antenna Analyzer Meter Tester For Ham Radio DC 12V Q9 Head
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
We only accept your
Ebay Address
,Please Make sure it's 100% right.
The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor or negative feedback, so that we can satisfactorily address your concerns.
Payment Method
Returns Policy
copyright © 2018 datacaciques
Home
Payment
Shipping
About us
Contact us
Home
Payment
Shipping
About us
Contact us
Details
Type 1
This is a SWR Analyzer for ham hobbists.
Frequency Generation & Control: 1 - 60 Mhz
Source impedance: 50 Ohms
Stability: +/- 100 ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
Usable Measurement Range:SWR: 1.0 to 9.99
Impedance: approx. 5 to 2000 ohms
RF Output: Adjustable: 2.0 Volts pp (typ)
Power supply: Powerd by External: 12 to 15 Volts DC, 500mA
Controls: Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
Switch: "Power On"
Connectors: RF Out: BNC
USB: Mini-B receptacle
External power: 2.1mm Power Jack (center pin positive)
Applications:
Measure antenna electrical parameters: SWR, impedance (resistance +
reactance), capacitance, inductance
Measure feedpoint impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, velocity factor, approximate Q
and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate
Q, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length of ? and ? wave phasing lines
Coaxial Cable Loss
Determine antenna tuner loss
Measure balun loss
Measure inductor Q
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
Operation button definitions:
Mode: selects operation mode: impedance(default), complex impedance, capacitance, and inducatance
BAND: select band from any of the available bands: 160M to 6M
CONFIG: Provides menu for configurations and extended functions: PC Link, step size setting, suspend timeout setting, calibration, and software upgrade
SCAN: pressing this control initiates a scan of frequencies of the selected BAND. Scan exits to impedance mode showing the 2:1 bandwidth and the resonant point o the antenna
CAN(up): increase frequency and used to cancel operation for CONFIG menu
VAL(down): decrease frequency and used to validate operation for CONFIG menu
Package includes:
1 x ANT SWR Antenna Analyzer Meter For SARK100 Ham Radio Hobbists
Type 2(With Bluetooth)
Features：
Mini size: 9.1*5.3*2.5cm
Weight:220kg
Support for Android 2.2 -4.0 or new version, supports 3--10 inch  mobile phone and tablet,
Support windows via software
Bluetooth connection method  :
1, the installation software Andrews
2 , press the SET button to open the talent PC link
3 Press the DOWN button to confirm dc plug in the Bluetooth antenna head
4 Open the Bluetooth phone paired with the day assigned for 1234
5 Open Android software click the link prompts the connection point of the scan is completed successfully
Automated antenna SWR analyzer
Hardware:
Precise and self-calibrating reflectometer design measures forward and reflected signals and impedance data
Display 2x16 with optional backlight
Precision DDS signal generator (AD9851) used as signal source
Buzzer
Operation:
Manual control option displays SWR and complex impedance at selected frequencies
Automatic scanning results displayed as frequencies of lowest SWR and complex impedance
Battery operated for field use or use external 13.8V wall adaptor
Power saving modes
Multi-point calibration for better accuracy
Instrument Capabilities:
Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance
Measure feedpoint impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length of ¼ and ½ wave phasing lines
Coaxial Cable Loss
Determine antenna tuner loss
Measure balun loss
Measure inductor Q
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
Soecifications:
Frequency Generation & Control:
1 - 60 Mhz
Source impedance: 50 Ohms
Stability: +/- 100 ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
Usable Measurement Range:
SWR: 1.0 to 9.99
Impedance: approx. 5 to 2000 ohms
Adjustable: 2.0 Volts pp (typ)
External: 12 to 14 Volts DC, 500mA
RF Output:
Power supply: DC 12-14V
Controls:
Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
Switch: "Power On"
USB: Mini-B receptacle
External power: 2.1mm Power Jack (center pin positive)
Package included:
1*SARK-100 Mini60 HF ANT SWR Antenna Analyzer Meter 1-60 Mhz SARK100 Für Ham Radio(
Please note: Battery is not included
)
Type 3(No bluetooth)
Hardware:
Precise and self-calibrating reflectometer design measures forward and reflected signals and impedance data
Display 2x16 with optional backlight
Precision DDS signal generator (AD9851) used as signal source
USB port connects to PC for field-upgradeable software and uploading of real-time measurement data
Buzzer
Operation:
Manual control option displays SWR and complex impedance at selected frequencies
Automatic scanning results displayed as frequencies of lowest SWR and complex impedance
Power saving modes
Multi-point calibration for better accuracy
Instrument Capabilities:
Measure antenna electrical parameters: SWR, impedance (resistance + reactance), capacitance, inductance
Measure feedpoint impedance
Measure ground loss
Adjust antenna tuners and determine loss
Measure inductors and capacitors
Measure coax transmission line (SWR, length, velocity factor, approximate Q and loss, resonant frequency, and impedance)
Measure and determine optimum settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
Determine characteristic impedance of transmission line
Determine length of ¼ and ½ wave phasing lines
Coaxial Cable Loss
Determine antenna tuner loss
Measure balun loss
Measure inductor Q
Estimate quartz crystal parameters
Measure magnetic loop resonance and SWR
SPECIFICATIONS
Frequency Generation & Control:
1 - 60 Mhz
Source impedance: 50 Ohms
Stability: +/- 100 ppm
Spectral Purity: Harmonics down >- TBD dB beyond 60 MHz
Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz, and 100 kHz
Usable Measurement Range:
SWR: 1.0 to 9.99
Impedance: approx. 5 to 2000 ohms
RF Output:
Adjustable: 2.0 Volts pp (typ)
Power supply:
External: 12 to 14 Volts DC, 500mA
Controls:
Pushbuttons (5): "Mode", "Band", "Config", "Scan", "Up", "Down"
Switch: "Power On"
Connectors:
RF Out: BNC
USB: Mini-B receptacle
External power: 2.1mm Power Jack (center pin positive)
Package includes:
1 x Antenna Analyzer (as the picture)(
Please note: Battery is not included
)
Type 4(This is an Short Wave Antenna Analyzer Meter Tester)
Can test a standing wave, resistance, capacitance, etc
Can connect the computer to do the antenna and other graphic analysis
Test frequency: 1-60 m
Size: 90 mm * 82 mm * 30 mm (super light super mini)
Power supply: 12 v
Joint: Q9 head
Package Contents
1xMR100 Shortwave Antenna Analyzer Meter Tester For Ham Radio DC 12V Q9 Head
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
We only accept your
Ebay Address
,Please Make sure it's 100% right.
The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually.
We maintain high standards of excellence and strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor or negative feedback, so that we can satisfactorily address your concerns.
Payment Method
We accept Paypal ONLY. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
Returns Policy
We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
Please include your eBay ID and item number with any email requests.