-40%

4x Vinyl Patch + Glue Kit Above Ground Swimming Pool PVC Intex EasySet Bestway

$ 10.31

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Brand: Intex
  • Type: Above Ground Pool Parts
  • Restocking Fee: No
  • MPN: Does Not Apply
  • Pool Type: Above-Ground
  • Custom Bundle: Yes
  • Bundle Description: Patches + Glue
  • Refund will be given as: Money Back
  • Condition: New
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Seller

    Description

    BRAND NEW, UNUSED!
    MOST TRUSTED BRAND!
    A Permanent Solution to PVC/Vinyl Water and Air Products.
    Unlike self-adhesive products, this won't come off after few times inflation or touching water.
    1 piece of stripe and 3 pieces of round Vinyl/PVC repair patches + a vinyl cement/glue set.
    Can be used to repair cuts and holes on inflatable above ground swimming pools and water toys.
    Intex original material.
    Waterproof material and works under air pressure.
    COLORED PATCHES
    1 (one) Piece of 7.5" × 2.5" (19.0cm × 6.3cm)
    3 (Three) Pieces of ~ 2.5" (6.35cm) Diameter
    Color: Blue and White
    VINYL REPAIR KIT (59632EP)
    Glue: 0.2oz (5.67g) Tube
    Clear Patch: ~ 7.75" × 2.75" (19.7cm × 6.9cm)
    Instructions
    Deflate the product so the repair area is as flat as possible.
    Clean and dry the area thoroughly where repair is to be made. Note: To allow better adhesion on flocked surfaces, apply some glue to the repair area and rub away the flocked texture until a smooth surface is exposed.
    Use only enough liquid cement to wet the back to repair area. Note: Do not use too much cement, it will not seal properly.
    Press the patch firmly on the repair area and hold temporarily.
    If article is an inflatable, do not re-inflate for 12 hours.
    Caution
    The glue has a strong smell. Some people may be sensitive to it.
    Be careful when using for corners and seams.
    Do not use near fire or flame.
    Keep out of reach of children.
    Note
    If you decided to use the clear patch included in the repair kit, you may iron the patch for 10sec, in order to make it flat and prevent it from rolling back. Please use temperature no more than 275°F (nylon or silk). Make sure to use one or two layers of piece of cotton fabric (e.g. cloth) between the iron and the patch to protect the patch from direct heat! Let it cool down for 30sec before use. Too much heat may destroy the patch!
    Disclaimer: Please make sure your inflatable is made of PVC/Vinyl material otherwise this patch and glue kit won't work! This item is NOT for Hypalon materials or bike products.
    Satisfaction guaranteed. Return for any reason if you're not satisfied and your money back.
    Usually ships same day or within one business day after payment received.
    Ships via USPS first-class from California, USA.
    Important: If you have a special request, please contact us before placing your order and make sure we would be able to fulfill it. We cannot guarantee to honor any request sent via messages attached to the order or after the order has been placed.