4/16/40/64Bit WS2812 Matrix LED 5050 RGB Full-Color Driver Board For Arduino

Description

Visit store
Items for sale
About us
Product Details
4-Bit WS2812B 2*2 Full Color 5050 RGB LED Lamp Panel Light For Arduino
Features:
100% Brand new and high quality!!
The control circuit and the LED share the only power source. Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.
Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
Built-in electric reset circuit and power lost reset circuit.
Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s.
Cascading port transmission signal by single line.
Any two point the distance more than 5m transmission signal without any increase circuit.
When the refresh rate is 30fps, cascade number are not less than1024 points.
Send data at speeds of 800Kbps.
The color of the light were highly consistent, cost-effective..
Applications:
Full-color module, Full color soft lights a lamp strip.
LED decorative lighting, Indoor/outdoor LED video irregular screen.
Specifications:
Color: black
Size: 1.8cm*1.5cm
Package Included:
1 x 5050 RGB LED Lamp Panel
40-Bit 8x5 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board For Arduino
Main features
1. Intelligent reverse polarity protection, power supply reverse polarity will not damage the IC.
2. IC control circuit and a power LED spot light utility.
3. Control circuit chip with RGB components in a package in 5050,
to form a complete external control pixels.
4. built-in signal shaping circuit, any one pixel after receiving the signal through the waveform
shaping and then output to ensure line waveform distortion will not accumulate.
5. Built-in power-on reset and brown-out reset circuit.
6. trichromatic color of each pixel can realize 256 highlighted, complete 16777216 colors of all
true color display, the scanning frequency is not less than 400Hz / s.
7. serial cascade interface, through a signal line to complete the receiving and decoding of data.
8. transfer transmission distance between any two points in less than 5 meters without any
additional circuitry.
9. When the refresh rate of 30 frames / sec, cascading number of not less than 1024 points.
10. data transmission speeds of up to 800Kbps.
11. The color of the light highly consistent, cost-effective.
Package Included:
1 x 8x5 40 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino
64-Bit WS2812 8x8 LED Matrix LED 5050 RGB Full-Color Driver Black Board for Arduino
Main features:
1. Intelligent reverse polarity protection, power supply reverse polarity will not damage the IC.
2. IC control circuit and a power LED spot light utility.
3. Control circuit chip with RGB components in a package in 5050,
to form a complete external control pixels.
4. built-in signal shaping circuit, any one pixel after receiving the signal through the waveform
shaping and then output to ensure line waveform distortion will not accumulate.
5. Built-in power-on reset and brown-out reset circuit.
6. trichromatic color of each pixel can realize 256 highlighted, complete 16777216 colors of all
true color display, the scanning frequency is not less than 400Hz / s.
7. serial cascade interface, through a signal line to complete the receiving and decoding of data.
8. transfer transmission distance between any two points in less than 5 meters without any
additional circuitry.
9. When the refresh rate of 30 frames / sec, cascading number of not less than 1024 points.
10. data transmission speeds of up to 800Kbps.
11. The color of the light highly consistent, cost-effective.
Package Included:
1PCS 8x8 64 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino
16-Bit RGB LED 4 x 4 WS2812 5050 RGB LED + Integrated Drivers For Arduino
Features:
● Intelligent reverse polarity protection, power supply reverse polarity will not damage the IC.
● IC control circuit and a power LED spot light utility.
● Control circuit chip with RGB components in a package in 5050, to form a complete external control pixels.
● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate.
● Built-in power-on reset and brown-out reset circuit.
● trichromatic color of each pixel can realize 256 highlighted, complete 16777216 colors of all true color display, the scanning frequency is not less than 400Hz / s.
● serial cascade interface, through a signal line to complete the receiving and decoding of data.
● transfer transmission distance between any two points in less than 5 meters without any additional circuitry.
● When the refresh rate of 30 frames / sec, cascading number of not less than 1024 points.
● data transmission speeds of up to 800Kbps.
● The color of the light highly consistent, cost-effective.
Package Included:
1 x RGB LED 4x4 16Bit WS2812B 5050 RGB LED + Integrated Drivers For Arduino
Payment Method
Shipping Policy
Returns & Refund Policy
Feedback
Payment Method
EBAY Managed Payment.
But we only
Accept
your
Ebay Address
, please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping Policy
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Returns & Refund Policy
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.