-40%

1973 - 1987 C10 3" Drop Spindles by DJM (1.0" Rotor)

$ 171.86

Availability: 15 in stock
  • Warranty: Lifetime
  • Returns Accepted: ReturnsNotAccepted
  • Placement on Vehicle: Left
  • Brand: DJM Suspension
  • Condition: New
  • Manufacturer Part Number: DJM-DS2045L-3
  • Country/Region of Manufacture: United States

    Description

    1973 - 1987 C10 3" Drop Spindles by DJM (1.0" Rotor)
    Tech Tip Regarding Aftermarket Brake Rotors
    We've heard about some problems with clearance on brake rotors, we did some testing and here is what we found.
    Read More
    A close look at our spindles will tell the story of precision machining resulting in ball joints & tie-rods properly positioned, quality meehanite castings machined as accurately as the 4142 Chrome moly spuds (axles) inserted into them. All of this adds up to a strong accurate part. It's a fair amount of work to change your spindle don't waste your effort with inferior spindles. Speaking of wasting time, make sure you get the right spindle set before you start your installation! It's very important you correctly measure the thickness of your brake rotor, if you get the wrong one you will discover this when you try to assemble your brakes after installing the spindle. Guaranteed to make you say bad words! Here's the deal a 1.25" thick rotor use DS2045H-3 or, if you have a 1.0" thick brake rotor you're in the right place! This simple mistake has ruined more than one install experience!
    Learn more about Spindles at DJM University